SELLEYS WET AREA SPEED SEAL
Wet Area Speed Seal Silicone
Super fast cure and stiff consistency provide a waterproof seal to allow shower use 2 HOURS after application. Cured sealant is formulated to resist growth of unsightly mould and mildew.
IDEAL FOR
– Showers, Baths & Spas, Sinks, Plumbing Fixtures, Ceramic, Glazed & Porcelain Fixtures, Metal, Copper & Brass Fittings, Powder Coated Aluminium / Aluminium, Plastic Laminates, Rubber, Glass, Stainless Steel, Concrete & Grouts
FEATURES
– Waterproof
– Mould Repellent
– Resists Lifting
– Neutral Cure
– 100% Siliconee
– 25 Year Guarantee*
DIRECTIONS
1. Clean & dry surface using Mineral Turpentine.
2. Cut tip off cartridge and cut nozzle at a 45˚ angle. Fit nozzle to cartridge. Place cartridge into caulking gun.
3. Hold caulking gun at 45˚ angle and gun sealant ahead of nozzle ensuring product is pushed into joint.
HANDY TIPS
– For a smooth finish, tool with spatula within 5 minutes of application. For best finish dip spatula in detergent.
– Excess sealant must be cleaned up before product skins. Wipe away excess with a cloth dampened in Mineral Turpentine.
– Sealant will have a firm skin and will be waterproof and shower ready 2 hours after application in showers. The semi-cured sealant must not be touched until fully cured (48 hours).
– For a large job, break up into sections tooling off after each, before the sealant skins over.
– For a better finish complete painting prior to use of sealant as it cannot be painted over.
– For a cleaner appearance mask both sides of joint prior to sealing. Remove tape before silicone skins.
– Not recommended for use in aquariums or where there is contact with food, eating utensils or drinking water.
– Store in a dry place below 30˚C. After opening, use within 6 months.
SAFETY TIPS
– Uncured product may irritate eyes. If in eyes, flood the eyes for at least 15 minutes and seek medical advice.
– Avoid contact with skin, if contact occurs, wipe off immediately and wash with detegent. It may irritate sensitive skin.
– Avoid breathing in vapours.
– Ensure you use a well ventilated area as product releases methyl ethyl ketoxime while curing.
– For advice, contact a Poisons Information Centre (AUS 131 126; NZ 0800 764 766) or a doctor.
– Keep away from children.
Reviews
There are no reviews yet.